![background image](http://html.mh-extra.com/html/nec/univerge-sv9300/univerge-sv9300_networking-manual_249030059.webp)
Chapter 1 CCIS FEATURES
1-45
NWA-088654-001 Rev.1.0
94ch1002.fm
CCIS BASIC PROGRAMMING
• When the setting of more than 17 Highway Channels is required for a CCT blade, reassignment of
the Highway Channel (111 ch) allocation is required to each physical slot (slot01-06/07-12/13-18).
The programming for Highway Channel reassignment is as follows. For the details of Highway
Channel reassignment, refer to “CMF7 Y=9” in Command Manual.
• To execute Loopback for CCT, do the following data programming.
DESCRIPTION
DATA
Reassign Highway Channel to the slot accom-
modated the CCT blade.
•
(1)
(2)
Y=9
XX YY
XX: 01-50: Unit No.
YY: 01/07/13: Lowest Slot No. in each
Line/Trunk chassis (2U)
XX YY
XX: 01-50: Unit No.
YY: 06/12/18: Highest Slot No. in each
Line/Trunk chassis (2U)
Execute the blade reset to all slots of the Unit
accommodated the CCT blade.
•
(1)
(2)
Y=3
XX YY
XX: 01-50: Unit No.
YY: 01-18: Slot No.
XX YY
XX: 01-50: Unit No.
YY: 01-18: Slot No.
DESCRIPTION
DATA
Execute Loopback for CCT.
•
(1)
(2)
Y=24 Loopback setting
000-127: Trunk Blade No. assigned by
CM05 Y=1
00 : Local Loopback
01 : Payload Loopback
15 : Loopback OFF
START
CMF7
CME0
END
START
CMAA
END