![background image](http://html.mh-extra.com/html/nec/univerge-sv9300/univerge-sv9300_networking-manual_249030111.webp)
Chapter 1 CCIS FEATURES
1-97
NWA-088654-001 Rev.1.0
94ch1003.fm
CALL FORWARDING-BUSY LINE-CCIS / MULTIPLE CALL FORWARDING-BUSY LINE-CCIS
Operating Procedure
Single Line Telephone
To set a Call Forwarding-Busy Line-CCIS from a Single Line Telephone:
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding-Busy Line feature access code and receive Feature Dial Tone.
3. Dial the outgoing trunk access code and receive a single burst of Service Set Tone.
(This operation is required for a network using Open Numbering Plan.)
4. Dial the desired target station number and receive Service Set Tone.
5. Wait approximately five seconds and receive Service Set Tone.
To cancel a Call Forwarding-Busy Line-CCIS from a Single Line Telephone:
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding-Busy Line cancellation code and receive Service Set Tone.
Attendant Console
To set a Call Forwarding-Busy Line-CCIS from an Attendant Console:
1. Press an idle
LOOP
key.
2. Dial the Call Forwarding-Busy Line feature access code and receive Feature Dial Tone.
3. Dial the originating station number.
4. Dial the outgoing trunk access code and receive a single burst of Service Set Tone.
(This operation is required for a network using Open Numbering Plan.)
5. Dial the desired target station number and receive Service Set Tone.
6. Press the
RELEASE
key.
To cancel a Call Forwarding-Busy Line-CCIS from an Attendant Console:
1. Press an idle
LOOP
key.
2. Dial the Call Forwarding-Busy Line cancellation code and receive Feature Dial Tone.
3. Dial the originating station number and receive Service Set Tone.
NOTE:
The Attendant Console can only set/cancel Call Forwarding-Busy Line for stations within the
local system in which the Attendant Console resides.