manualshive.com logo in svg

NEC SL1100, Feature Manual

Share
Download
NEC SL1100 Feature Manual Download Page 236

Screened Transfer (TRF) Operation

With Active
Greeting Not
Recorded

1.

Places a screened (Intercom)
call to extension.

• If answered, transfers call.

2.

If unanswered

*1

 :

• With no Next Call Routing

Mailbox, InMail prompts call-
er to leave a message.

• With a Next Call Routing

Mailbox, caller can dial 

1

 to

leave a message or 

2

*2

 for

other options.

When busy:

• With no Next Call Routing Mail-

box, InMail prompts caller to
leave a message.

• With a Next Call Routing Mailbox,

caller can dial 

1

 to leave a mes-

sage or 

2

*2

 for other options.

When in DND:

• With no Next Call Routing Mail-

box, caller hears greeting and
can leave a message.

• With a Next Call Routing Mail-

box, caller can dial 

1

 to leave a

message or 

2

*2

 for other options.

If Auto Attendant Direct to Voice Mail is on, see 

Auto Attendant Direct to Voice Mail on page 2-26

 for more information.

 

Extension Idle

Extension Busy

Extension in DND

With Active
Greeting Re-
corded or not
recorded

1.

Sends call immediately to mailbox:

• Plays greeting.
• Prompts caller to start recording.

*1. After 47-08-02 Screened Transfer Timeout interval.
*2. Dialing 2 routes the call to the Next Call Routing Mailbox for additional dialing options. See 

Next Call

Routing Mailbox on page 2-194

.

Related Features

Answer Table on page 2-19

Determines how the Automated Attendant answers outside calls on each trunk.

Automated Attendant on page 2-31

The Answer Table determines how the Automated Attendant answers calls.

Routing Mailbox on page 2-213

The mailbox associated with an Answer Table that specifies which dialing options (Dial Action Table)
and announcements are available to Automated Attendant callers.

You cannot program a Call Routing Mailbox as a Screened Transfer (TRF) Dial Action Table
destination.

Caller ID on page 2-43

InMail provides Caller ID data for a Screened Transfer call after it is answered.

Dial Action Table on page 2-60

Defines the dialing options for the Call Routing Mailbox chosen by the active Answer Table.

Forced Unscreened Transfer on page 2-106

The Subscriber Mailbox can optionally convert Automated Attendant Screened Transfers to
Unscreened Transfers.

Unscreened Transfer on page 2-238

After an Automated Attendant caller dials an extension, InMail immediately transfers the call to the
destination and hangs up.

SL1100

ISSUE 3.5

2-218

Screened Transfer

S

Summary of Contents for SL1100

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands