NEC SL1100 Feature Manual Download Page 62

Page: 62 / 288

Check your telephone system programming to be sure the telephone system is set up to receive
Caller ID and pass it to the InMail voice mail ports.

Program

Number

Program Name

Description

14-01-22

Basic Trunk Data Setup - Call-
er ID to Voice Mail

Enter 1 (Yes) to enable this option.

By default, this option is disabled.

14-02-10

Analog Trunk Data Setup -
Caller ID

Enable (1) a trunk ability to receive Caller ID data.

By default, a trunk's ability to receive Caller ID data is disabled
(0).

20-09-02

Class of Service Options (In-
coming Call Service) - Caller
ID Display

Enter 1 (Yes) to enable the Caller ID display at an extension.
This option does not apply to InMail Voice Mail Ports.

By default, this option is disabled.

20-06-01

Class of Service for Exten-
sions

Assign Class of Service to extensions.

By default, Extension 101 is Class 15 and other extensions are
Class 1.

Operation

Not applicable.

SL1100

ISSUE 3.5

2-44

Caller ID

Summary of Contents for SL1100

































































































































































































































































































Search results

Summary of Contents for SL1100

Reviews:

Related manuals for SL1100

Brands by name

Popular brands

NEC SL1100, Feature Manual

Search results

Summary of Contents for SL1100

Reviews:

Related manuals for SL1100

Brands by name

Popular brands