manualshive.com logo in svg

NEC SL1100, Feature Manual

Share
Download
NEC SL1100 Feature Manual Download Page 155

6.

To listen to a message:

• To the right of the message you want to hear, click on the download icon.
• Depending on the settings of your browser, you may get a security prompt.

• Click on the menu and choose to allow the file to download.
• Depending on the Windows configuration, you may be prompted again to either 

Open

 or 

Save

the message. If you want to listen to the message, click 

Open

 and the default .wav file player

will play the message. If you want to save the message, click on the 

Save

 icon and you can

browse to the location you want the message saved on the local PC.

Changing Mailbox Greetings using User Admin Mode (UA)

Audio files up to 1 MB may be uploaded to the InMail for any mailbox greeting. In order for uploaded
greetings to properly play on the InMail they must be in the proper format. Audio files not recorded in
the proper format may not playback on the InMail.

The proper format is:

• Bit Rate: 64 kbps
• Sampling Size: 8 bits
• Channel: 1 (Mono)
• Sampling Rate: 8 kHz
• Audio Format: CCITT μ-law

1.

To log in, open an Internet browser and enter the IP of the SL1100 LAN port in the address line.
At default the IP Address is 192.168.0.10.

ISSUE 3.5

SL1100

InMail Feature Manual

2-137

I

Summary of Contents for SL1100

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands