manualshive.com logo in svg

NEC SL1100, Feature Manual

Share
Download
NEC SL1100 Feature Manual Download Page 242

SL Net

(This feature is for V1.5 or higher)

Description

SL Net networking, using an IP Network, provides for a seamless connection; joining multiple SL1100
communication servers into a "virtual" single communication server.

A unified numbering plan allows users to access any extension in the network as if they were in the
same location. Starting with 

V1.5

 software, the InMail can be used for the Centralized Voice Mail

portion of that feature. Refer to the SL1100 Networking Manual for more information.

Conditions

• Main Software Version 

V1.5 or higher

 is required for the InMail to support SL Net Centralized Voice

Mail.

• When using InMail for centralized voice mail in a SL Net network, replication should be scheduled

during non-peak hours of operation.

Default Settings

None

Related Features

None

Guide to Feature Programming

Refer to the SL1100 Networking Manual for information on configuring SL Net.

SL1100

ISSUE 3.5

2-224

SL Net

S

Summary of Contents for SL1100

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands