manualshive.com logo in svg

NEC SL1100, Feature Manual

Share
Download
NEC SL1100 Feature Manual Download Page 144

InMail-Auto Setting

Auto Setting on Cold Start needs Version 1.5 or higher software.

Auto Setting on Warm Start needs Version 3.0 or higher software.

Description

Auto Setting Cold Start (Version 1.5 or higher)

This feature will automatically program the required InMail settings when an InMail CF is installed in
the SL1100 system at default (Cold start).

Following program changes are made automatically.

• 11-07-01, for Department Group 32 = 3999
• 15-03-01, for extensions 213-228 (V3.5 or higher) = Dial Pulse (0)
• 15-03-03, for extensions 213-228 (V3.5 or higher) = Special (1)
• 16-02-01, for extensions 213-228 (V3.5 or higher) = 32
• 45-01-01 = 32
• 47-01-17 = 113 (V3.5 or higher)

Auto Setting Warm Start (V3.5 or higher)

This feature will automatically program the required InMail settings when an InMail CF is installed into
a SL1100 system version 3.50 or higher. All that needs to be done is to power off the SL1100, mount
the InMail CF and power the SL1100 back on. When the SL1100 restarts the following program
changes will have automatically been made:

• 11-07-01, for Department Group 32 = 3999
• 15-03-01, for extensions 213-228 = Dial Pulse (0)
• 15-03-03, for extensions 213-228 = Special (1)
• 16-02-01, for extensions 213-228 = 32
• 45-01-01 = 32
• 47-01-17 = 113

Conditions

• If any of the following programs have been changed from default the InMail will not be auto-matically

programmed on system startup:

- 11-02-01 for extensions 213-228 (V3.5 or higher)
- 11-07-01 for Department Group 32
- 15-03-01 for extensions 213-228 (V3.5 or higher)
- 15-03-03 for extensions 213-228 (V3.5 or higher)
- 16-02-01 for extensions 213-228 (V3.5 or higher)
- 45-01-01
- 47-01-17

• Once InMail Auto Setting programming changes are made you cannot restore the original settings.
• InMail Auto Setting does not change extension number assignments in PRG11-02-01. If the ex-

tension numbers for ports 113-128 (V3.5 or higher) were deleted then the InMail ports will not have
extension numbers and the voice mail feature will not work properly.

SL1100

ISSUE 3.5

2-126

InMail-Auto Setting

I

Summary of Contents for SL1100

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands