NEC SL1100, Feature Manual

Page: 115 / 288

Find-Me Follow-Me
Description
Find-Me Follow-Me helps an outside caller locate an extension user who is not at their desk. If their
call is unanswered and is picked up by voice mail, the caller has the option of dialing a digit to try up to
three alternate Find-Me Follow-Me destinations. A destination can be an outside number (such as a
cell phone or home office) or a co-worker's extension.
The Find-Me Follow-Me destinations are set up in the Find-Me Follow-Me schedule. Each of the three
schedule entries can be individually enabled or disabled and provides options for Start Hour, End
Hour, Day of Week (V2.0 or higher), and destination number. If the caller chooses the Find-Me Follow-
Me option, the system will try each enabled entry that is active for the current day (V2.0 or higher) and
time (i.e., in-schedule). The system will not try any entries that are disabled or are not in-schedule.
When trying the destinations, Find-Me Follow-Me skips an active, in-schedule number that is busy, in
DND, or is unanswered. When all active in-schedule destinations have been tried the caller can then
choose to try Find-Me Follow-Me again or select another option.
You can set up Find-Me Follow-Me for an extension in system programming. In addition, an extension
user can set up Find-Me Follow-Me from their Mailbox Options.
Conditions
• This feature requires SL-VM-ADVANCE LIC (1015).
• Find-Me Follow-Me settings can be changed using the Telephone Mailbox Option Interface and
system programming only.
• Find-Me Follow-Me can be used for standard subscriber mailboxes and Group Mailboxes set to
subscriber in PRG 47-03-03.
• Find-Me Follow-Me does not work for internal callers.
• Find-Me Follow-Me requires that Tandem Trunking be enabled on the line that rings into the
Automated Attendant. If Tandem Trunking is disable, the Find-Me Follow-Me options are not
available.
• In addition to User Pro, when language prompt Version 2.30 or higher is installed on the InMail CF,
the Find Me Follow Me Day of Week schedule options can be set from the mailbox telephone
interface.
Related Features
Group Mailboxes
Guide to Feature Programming
Program
Number
Program Name Assigned Data Note
14-01-13 Basic Trunk Data Setup - Trunk-to-Trunk Trans-
fer / Loop Disconnect Supervision 0 = Disable
1 = Enable
Default = 0
ISSUE 3.5 SL1100
InMail Feature Manual 2-97
F