NEC SL1100 Feature Manual Download Page 274

Page: 274 / 288

Double-click the InMail Utility shortcut on the PC desktop. The InMail Utility Main Screen is
displayed. (Refer to

Figure 3-8 InMail Utility Main Screen on page 3-6

Select

the

CompactFlash Reader
and display important
InMail CompactFlash
card information.

Prompt Version

the

version of the system
prompts on the InMail
Compact Flash card.

To check the utility version
number, click Help, then
select

About SL1100 InMail

Utility

...

Update

the voice

prompts stored on the
InMail CompactFlash
Card (required for
feature upgrades).

Backup

to the PC and

Restore

the voice

prompts and recorded
names, messages and
greetings stored on the
InMail CompactFlash
Card.

Optionally

Initialize

(completely erase) the
InMail CompactFlash
card and load the latest
voice prompts.

Figure 3-8 InMail Utility Main Screen

Selecting the CompactFlash Card

After inserting the InMail CompactFlash card into the reader, it must be selected.

SL1100

ISSUE 3.5

3-6

InMail Utility

Summary of Contents for SL1100

































































































































































































































































































Search results

Summary of Contents for SL1100

Reviews:

Brands by name

Popular brands

NEC SL1100, Feature Manual

Search results

Summary of Contents for SL1100

Reviews:

Brands by name

Popular brands