NEC SL1100, Feature Manual

Page: 124 / 288

Forced Unscreened Transfer
Description
A Subscriber can optionally convert Automated Attendant Screened Transfers to Unscreened
Transfers by enabling this option in the Mailbox user interface.
• Calls from the Automated Attendant ring like other transferred calls and display the incoming Caller
ID data (if provided by telco and enabled in programming) as the call is ringing.
• As with Screened Transfers, unanswered calls route to the subscriber's greeting (recorded or
default) so the caller can leave a message. However, with Unscreened Transfer the caller cannot
dial 2 to reach the Next Call Routing Mailbox options (if programmed).
Related Features
Dial Action Table on page 2-60
If enabled in the Subscriber Mailbox, InMail automatically converts any Screened Transfers (TRFs) to
the subscriber's extension to Unscreened Transfers (UTRFs).
Screened Transfer on page 2-217
After the Automated Attendant caller dials an extension, InMail calls (screens) the destination
extension to see if the transfer can go through.
Unscreened Transfer on page 2-238
After an Automated Attendant caller dials an extension, InMail immediately transfers the call to the
extension and hangs up.
Programming
1. Enable Forced Unscreened Transfer for the Subscriber Mailbox.
Program
Number
Program Name Description
47-02-10 Forced Unscreened Transfer
(Forced UTRF)
Enter 1 (Yes) to enable this option to automatically convert Automa-
ted Attendant Screened Transfers to Unscreened Transfers.
By default, this option is disabled (0).
Operation
Not applicable.
SL1100 ISSUE 3.5
2-106 Forced Unscreened Transfer
F