Setting System Parameters 4-1
Setting System
Parameters
This chapter describes the Setup utility program that allows
you to enter system configuration information and control
special features of the system.
NOTE
Your system ships from the factory with the
correct system parameters for your configuration.
Unless you add optional hardware, you do not need
to run Setup to operate your system.
However, you might wish to run the Setup utility to
set features that customize your system, such as
security features.
System configuration information is stored in nonvolatile
memory. Nonvolatile memory retains its data when system
power is turned off. Nonvolatile memory in your system is a
complementary metal-oxide semiconductor (CMOS) chip.
The battery supplies continuous power to CMOS memory
and maintains configuration information when system
power is off.
NOTE
NEC recommends that you print out or write
down your current Setup parameters and store the
information in a safe place. This lets you restore
your system to the current parameters if you ever
need to replace the battery.
4
Summary of Contents for POWERMATE VE - 07-1996
Page 145: ...If You Have a Problem 8 15 ...
