3-40 Installing Options
4.
Remove the blank panel from the selected slot by
pressing the panel tabs from inside the front panel and
pushing the blank panel out.
Locating the blank panel tabs
5.
Remove the perforated metal plate from the selected slot
on the chassis by pulling the metal plate back and forth
until it releases.
6.
Install the device (see “Installing the 5 1/4-Inch
Device”).
Installing the 5 1/4-Inch Device
Install an accessible device into the device cage as follows.
1.
Remove the 3 1/2-inch drive bracket from the system
unit (see “Removing the 3 1/2-Inch Drive Bracket”).
2.
Remove the front panel (see “Removing the Front
Panel”).
3.
Follow the preinstallation instructions that come with the
device, such as setting jumpers and switches.
Top Blank Panel Tabs
Bottom Blank Panel Tabs
Summary of Contents for POWERMATE VE - 07-1996
Page 145: ...If You Have a Problem 8 15 ...
