3-34 Installing Options
Cabling an IDE Device
The following procedure explains IDE device cabling.
1.
Connect the IDE signal cable connector to the connector
on the IDE device.
Take care to prevent bending drive connector pins. Align
the IDE cable connector as shown in the following
figure.
2.
Locate an available power connector coming from the
power supply.
3.
Connect the appropriate power cable to the power
connector on the IDE device.
Connecting IDE device cables
4.
If you are installing an IDE CD-ROM reader, also
connect the audio cable (see the instructions that come
with the reader).
Red
Edge
Power
Cable
IDE
Cable
Summary of Contents for POWERMATE VE - 07-1996
Page 145: ...If You Have a Problem 8 15 ...