3-8 Installing Options
2.
Slide the cover forward to meet the front panel.
NOTE
The cover fits tightly. If the cover does not
slide all the way to the front panel, place one hand
on the front of the unit while you slide the cover
forward from the rear.
3.
Secure the cover with the two cover screws removed
earlier. (See “Removing the System Unit Cover,” earlier
in this chapter.)
4.
Reconnect all external peripherals.
5.
Plug in your power cables.
EXPANSION BOARDS
Your PowerMate supports ISA Plug and Play expansion
boards. With Plug and Play expansion boards, you can
install a board in an expansion slot without changing the
hardware settings. There are no system resource conflicts to
resolve. Plug and Play automatically configures the board
for the system.
Industry-standard 8- and 16-bit ISA, and 32-bit PCI
expansion boards are supported in the system unit. ISA
expansion boards can be Plug and Play or non-Plug and
Play boards.
Locating Expansion Slots
The PowerMate system has four expansion slots as follows.
two ISA slots
one PCI slot
one shared PCI/ISA slot.
Summary of Contents for POWERMATE VE - 07-1996
Page 145: ...If You Have a Problem 8 15 ...
