5-8 Setting System Board Jumpers
4.
Set a jumper on the Password Clear jumper pins.
Password clear jumper
5.
Replace the system unit cover (see “Replacing the
System Unit Cover” in Chapter 3).
6.
Connect system power cables and monitor.
7.
Power on the system. The system lets you boot your
computer.
8.
Power off, unplug the system and monitor, and remove
the cover.
9.
Remove the jumper block from the Password Clear
jumper pins.
10.
If you removed any expansion boards, replace them
(see “Installing an Expansion Board” in Chapter 3).
11.
Replace the system unit cover.
12.
Reconnect the power cables and peripheral devices.
13.
Power on the system.
Run Setup to set a new password (see Chapter 4, Setting
System Parameters).
Password Clear
Normal (default)
Password Clear
Summary of Contents for POWERMATE VE - 07-1996
Page 145: ...If You Have a Problem 8 15 ...
