5-6 Setting System Board Jumpers
4.
Set the L2 SRAM Cache jumper on pins 1
−
2 for an
asynchronous cache module or on pins 2
−
3 for a
synchronous pipeline burst cache module.
SRAM cache jumper
5.
If you removed any expansion boards, replace them
(see “Replacing an Expansion Board” in Chapter 3).
6.
Replace the system unit cover (see “Replacing the
System Unit Cover” in Chapter 3).
7.
Reconnect the power cables and peripheral devices.
8.
Power on the system.
Run Setup to enable the secondary cache (see Chapter 4,
Setting System Parameters).
SRAM cache
1-2 Asynchronous
2-3 Synchronous
Pipeline Burst
1
Summary of Contents for POWERMATE VE - 07-1996
Page 145: ...If You Have a Problem 8 15 ...
