NEC NVM-CA Series Integration Manual Download Page 242

Page: 242 / 266

Lucent Partner Plus

238

Integration Notes

Issue 1-0

Phone System Programming (cont’d)

If you are going to set up screened Automated Attendant transfers
(TRFs) to the extensions:

Program 105 Transfer Return Rings

Use this program to set this timer higher than the Rings before redirect transfer for any Call
Routing Mailbox that is handling calls.

User Features

To transfer an intercom or CO call directly into a mailbox:

Press Feature 14, enter the 2-digit mailbox number, and hang up.

To allow the Subscribers to call their mailboxes with one touch:

Program each extension with an auto dial button for the Voice Mail hunt group (Intercom 777).

To program a VMS Cover Button to extension:

Press Feature 15.

Summary of Contents for NVM-CA Series











































































































































































































































































Search results

Summary of Contents for NVM-CA Series

Reviews:

Related manuals for NVM-CA Series

Brands by name

Popular brands

NEC NVM-CA Series, Integration Manual

Search results

Summary of Contents for NVM-CA Series

Reviews:

Related manuals for NVM-CA Series

Brands by name

Popular brands