manualshive.com logo in svg

NEC NVM-CA Series, Integration Manual

Share
Download
NEC NVM-CA Series Integration Manual Download Page 129

Panasonic KXT-616

Issue  1-0

Integration Notes

 

X

125

Panasoni c K XT-616

Integrati on  No tes

Hardware and Software Requirements

Q

You need a KXT-616 station port for each Voice Mail port.

Q

Any software level is OK.

Voice Mail Availability

    This phone system is available on the NVM-2000CA with Software Version 8.01 or higher.

Phone System Programming

To have the Automated Attendant answer a CO line as soon as it rings 
in, use the following programs:

Program 09 - Flexible Day Ringing Assignment

Use this program to make a CO immediately ring the Voice Mail during the day mode.

Program 10 - Flexible Night Ringing Assignment

Use this program to make a CO immediately ring the Voice Mail during the night mode.

Any CO that should ring the Voice Mail during the day or night mode must be assigned ringing 
at one, two, or three of the Voice Mail extensions:  the extension ports that you plan on con-
necting to the the Voice Mail ports.  It is recommended that you program a CO to ring at all 
Voice Mail extensions.  In this way, if one or two of the Voice Mail extensions are busy, the call 
can still be answered at the available Voice Mail extension.

Note:

Company greetings are assigned via the Answering Schedule Tables to ports and not to COs. 
So if you want CO1 to be answered by a different set of "company greetings" than CO2, for 
example, make sure that CO1 and CO2 do not ring the same Voice Mail extensions (Voice Mail 
ports).   REMINDER:  If you use this CO scenario, make sure that you keep track of which 
COs ring which ports.  You will need this information later on.

To have the Automated Attendant answer a CO line after a delay, use 
the following programs:

Program 17 - Delayed Ringing Assignment

Use this program to make a CO ring the VoiceMail after a delay, which is counted by the 
number of rings.

Any CO that should ring the Voice Mail after a delay must be assigned delayed ringing at one, 
two, or three of the Voice Mail extensions:  extension ports that you plan on connecting to the 
Voice Mail ports.  It is recommended that you program a CO to ring at all Voice Mail exten-
sions, so that a call can be answered at an available extension, whenever one or more exten-
sions are busy.

Summary of Contents for NVM-CA Series











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands