NEC NVM-CA Series, Integration Manual

Page: 37 / 266

Lucent Partner Plus
Issue 1-0 Integration Notes
X
33
Lucent Par tn er Pl us
Integrati on Notes
Required Hardware and Software
Q
Processor must be R 3.1 module for inband signaling
Q
Station/Line 206 Module (206E R3.1) is required for Message Waiting capability for voice
messages.
Voice Mail Availability
This phone system is available on these Voice Mail systems with all software levels:
Q
NVM-22CA
Q
NVM-202exCA
Q
NVM-2000CA
Phone System Programming
You will need the Lucent Partner Plus manual to complete this programming.
To have the Automated Attendant answer calls:
Program 607 AA Extensions
Use this program to identify each Lucent Partner extension that will have a Key *AA/VM port
connected. This is to notify display set users of a call being handled by the Voice Mail System
ports.
Program 505 Hunt Group Extensions
Use this program to assign the Lucent Partner extensions to be connected to AA/VM ports to
Hunt Group 7. This Hunt Group number is the only one that will send integration protocol.
Program 206 Group Call Distribution
Use this program to assign the lines that should terminate and be answered by Hunt Group 7
above.
Program 507 VMS Hunt Schedule
Use this program to determine when calls will terminate to Hunt Group 7 (always, day only,
night only). This is dependent on the status of the Night Service Button at extension 10.
Program 506 VMS Hunt Delay
Use this program to determine how outside calls should be answered by the AA/VM: Immedi-
ate (after 2nd ring) or Delayed (after 4th ring).
If you are going to set up unscreened Automated Attendant transfers
(UTRFs) to the extensions:
Program 310 Auto VMS Cover
Use this program to determine whether an extension's unanswered intercom and transferred
calls are automatically covered by the voice messaging system. If Do Not Disturb is activated,
calls will go to voice messaging regardless of whether or not Program 310 is enabled.
Program 306 Transfer Return Extension
Use this program to determine the destination of an incomplete Auto Attendant transfer. The
destination is typically extension 10. An incomplete transfer is one that is not answered or one
that does not have Voice Mail coverage.