NEC NVM-CA Series, Integration Manual, Page: 15 / 266

Alliance - M/L
Issue 1-0 Integration Notes
X
11
Alli ance - M/L
Integrati on Notes
Required Hardware and Software
Q
Each Voice Mail port must be connected to a port on the SLI-F (8G)-21KTU Card.
Q
Any software level is OK.
Voice Mail Availability
This phone system is available on these Voice Mail systems:
Q
NVM-22CA with software version 8.01 or higher
Q
NVM-202exCA with software version 7.01 or higher
Q
NVM-2000CA with software version 8.01 or higher
Phone System Programming
LK1 System Mode Programming
LK 1 - 11 System Transfer/Camp-On Selection
Select Yes (which is the default setting).
LK 1 - 46/LK 1 - 47 Access Code 1 - Digit/2-Digit Assignment
Assign codes to:
- SLT Conversation Record function 042.
- Directed Voice Mail Transfer function No. 43.
LK 3 - 02 SLT HookFlash Signal Selection
Select Hold (which is the default setting).
LK 3 - 11 VM Master Hunt Number FWD Assignement
Assign a pilot number to a Voice Mail Master Hunt Number.
LK 8 - 01 SLT or Automated Attendant to PBR Selection
Set PBR’s on the CPU to be used for Single Line Telephone.
LK4 Telephone Mode Programming
Data No. 10 - Station Number Assignment
Use this program to change the port assignments, as necessary.
Data No. 14 - Intercom Master Hunt Number Selection
Select a master hunt number.
Data No 35 - Voice Mail/SLT Selection
Select Yes for each Voice Mail port.
Data No 95 - DTMF/DP SLT Type Selection
Select DTMF for each Voice Mail port.
Data No 96 - SLT Connect Yes/No Selection
Select Yes for each Voice Mail port.
LK3 CO/PBX Line Mode
Data No. 42 - DIT Assignment
For each CO line, select which lines should ring Voice Mail during the day mode. Enter the
Voice Mail pilot number.
Data No. 43 - ANA Assignment
For each CO line, select which lines should ring Voice Mail during the night mode. Enter the
Voice Mail pilot number.