NEC NVM-CA Series, Integration Manual

Page: 257 / 266

Toshiba Strata DK24/56/96
Issue 1-0 Integration Notes
X
253
Toshiba Strata DK24/56/96
Integrati on Notes
Required Hardware and Software
To be provided
Voice Mail Availability
This phone system is available on the NVM-2CA Voice Mail system.
Phone System Programming
Program 10-1 - System Assignments
Ring Transfer, LED 07 - Enable (LED on)
Program 10-2 - System Assignments
•
DTMF Tone Return, LED II - Enable (LED off)
•
Voice Mail ID Code, DTMF Signal Time, LED 06 - Set for 80ms (LED on)
•
Voice Mail MW Cancel via Dial #64/Automatic, LED 04 - Enable (LED on)
Program 12 - System Assignments / Basic Timing
Flash Timing, Code 4 - Set @ 0.5 seconds
Program 13 - Defining the Message Center
Assign lowest number Voice Mail port to Message Center.
Program 15 - Assigning DP/DTMF
Auto-Release (AR) on VM calls, Code 0 - Enable for all CO lines
Program 31 - Station Class of Service
For VM Ports:
•
Toshiba VP (B + Sta #), LED 20 - Enable
•
Toshiba VP (B, No Sta), LED 19 - Enable
•
End/End Signal RCV (VM), LED 17 - Must enable
•
Receive VM ID Code, LED 16 - Enable
•
Toshiba VP Integration (A Tone/D), LED 15 - Enable
•
VM No Conference, LED 09 - Enable (LED on)
•
VM Groups 1 - 4, LED 05-08 - Put all VM ports into group 1,LED 05 (LED 05 on)
•
VM to VM Call blocking, LED 04 - Enable (LED on)
•
Executive and Privacy Override Blocking, LED 18 -Enable (LED on)
Program 33 - Station Hunting
Each Voice Mail port must be set up as a member of a hunt group.
Program 35 - Station Class of Service
•
Busy Station Transfer (BST), LED 20 - Enable for VM ports
•
Busy Station Ringing (BSR), LED 19 - Enable for all non-VMstations
•
Msg. Waiting Receive (RCV), LED 04 - Enable for allnon-VM stations
Note: LEDs 01, 02 & 04 must be on for all non-VM stations in order for Msg. Waiting to function.
Program 40 - Station CO Line Access
Use this program so that Voice Mail ports will be able to access CO lines, whenever callouts,
Message Notification, etc. are required.