NEC NVM-CA Series, Integration Manual

Page: 62 / 266

Toshiba Strata DK280
58
X
Integration Notes Issue 1-0
Phone System Programming (cont’d)
Program 35 - Station Class of Service
•
Busy Station Transfer (BST), LED 20 - Enable for VM ports
•
Busy Station Ringing (BSR), LED 19 - Enable for all non-VM stations
•
Msg. Waiting Receive (RCV), LED 04 - Enable for all non-VM stations
Note: LEDs 01, 02 & 04 must be on for all non-VM stations in order for Msg. Waiting to function.
Program 40 - Station CO line Access
When callouts, Message Notification, etc. are required, use this program to allow VM ports
access to CO lines.
Program 81 - 89 - CO Line Ringing Assignments
Use this program to assign CO ringing for day/night operation. When Auto Attendant is
required, make CO ring assignment only for the lowest numbered VM port in the hunt group.
Other Programming Notes
•
Do not change the default Message Waiting Set and Cancel codes: MW Set Code = 63.
MW Cancel Code = 64.
•
Each station must be programmed individually for VM ID codes.
•
Each station must be programmed individually for VM ID codes:
INT#656 (Call forwarding Protocol) = 01XX, where XX is the station number.
INT#657 (Direct Logon Protocol when MW lamp is lit) = 00XX, where XX is the station
number.
Voice Mail Programming
System Options
Listed below are two types of Voice Mail System Options:
Q
Those that the Toshiba DK280 does not use
Q
Those having default values not listed in the Programming Guide
RNA, Hold Retrieval
DEFAULT
:
FP
Busy, Hold Retrieval String
DEFAULT
:
FP
Lamp On String
DEFAULT
:
63X
Lamp Off String
DEFAULT
:
64X
Transfer String
DEFAULT
:
FW
Ringdown string
DEFAULT
:
1
Tenant 1 FAX detect dial string
Not used