NEC NVM-CA Series, Integration Manual

Page: 206 / 266

Nitsuko 124i
202
X
Integration Notes Issue 1-0
Phone System Programming (cont’d)
General Programming (cont’d)
Program 0406 - COS Options, Item 57: Continued Dialing
Use this program to enable Continued Dialing (1) for all extensions that will dial Voice Mail
features.
Program 0516 - Voice Mail Master Number
Use this program to assign an extension number and name for the Voice Mail Master Number.
Be sure that the number you select does not correspond to an installed extension or feature.
Consider picking a number that is outside the normal extension numbering range, such as 500.
Do not select a number that begins with 1, 8, or 9.
Program 0901 - Basic Trunk Port Setup (Part A), Items 14
–
17:
Trunk Service Type
Use this program to assign Service Type 4 to each trunk that you want to ring into Voice Mail
as a Direct Inward Line (DIL).
Program 0909 - Extension Ring Group Assignment
Enter 1 to enable overflow ringing.
To enable Voice Mail Overflow, assign selected extensions to a Ring Group that will ring for
unanswered DIL’s to Voice Mail ports.
Program 0910 - Trunk Ring Group Assignment
Use this program to assign the Voice Mail Overflow DILs to the Ring Group specified in Pro-
gram 0909 above to enable Voice Mail Overflow. This allows calls on DILs to ring other exten-
sions when all Voice Mail ports are busy.
Program 0917 - DIL Assignment
Use this program to assign a Voice Mail port as the DIL destination for each trunk that should
directly ring into Voice Mail. When all Voice Mail ports are in the same unique Extension
(Department) Group (see Program 1003 below), the DIL will ring another Voice Mail port if its
assigned port is busy.
Program 0919 - DIL No Answer Destination
Use this program to enter the Ring Group that unanswered DILs to Voice Mail will ring after
the DIL Call Waiting Time (Program 0405 Item 62) for Delayed Voice Mail Overflow.
Program 1001 - Basic Extension Port Setup (Part A), Item 5:
Terminal Type
Use this program to set all ASTU ports used for Voice Mail to Type 1.
Program 1003 - Extension (Department) Groups
Use this program to put all the Voice Mail ports in one extension group. The placement of
ports into one extension group allows a DIL to Voice Mail to ring other Voice Mail ports, when
the DIL’s assigned port is busy.