NEC NVM-CA Series, Integration Manual

Page: 127 / 266

Portrait 824
Issue 1-0 Integration Notes
X
123
Portrait 824
Integrati on Notes The information below applies to the Portrait 824 phone system.
Hardware and Software Requirements
Q
For each Voice Mail port, you will need an analog station port on the Portrait phone system.
The analog station ports are provided through the Voice Mail Interface Unit (P/N 82440). A
system can have a maximum of 4 Voice Mail Interface Units or 8 Voice Mail ports.
Q
You will need one of the following Portrait setups:
Setup 1:
Portrait 824 Main Cabinet (P/N 82400) with software version 2.1B or higher and 2CO/8STA
PCB (P/N 82402A)
The Voice Mail ports must be connected to the 2CO/8STA PCB (P/N 82402A).
Setup 2:
Portrait 824 Main Cabinet (P/N 82400A) with software version 2.1B or higher
The Voice Mail ports must be connected to station ports 1
–
8.
Setup 3:
Portrait 824 Main Cabinet (P/N 82400A) with software version 2.1B or higher and 2CO/8STA
PCB (P/N 82402A)
The Voice Mail ports must be connected to station ports 1
–
8.
Voice Mail Availability
This phone system is available on these Voice Mail systems:
Q
NVM-22CA with software version 8.01 or higher
Q
NVM-202exCA with software version 7.01 or higher
Q
NVM-2000CA with software version 8.01 or higher
Phone System Programming
When you are going to program the Voice Mail system through an extension in the telephone sys-
tem, use the programs in the order listed below:
Program 65 - Voice Mail Ports
Use this program to identify the Portrait connected to the Voice Mail.
Program 7 - Incoming Line Access/Audible
Use this program to enter the line that should ring the Voice Mail.
Program 23 - Unscreened Transfer Recall
Use this program to determine how long a call will ring an extension before going to the Voice
Mail.