manualshive.com logo in svg

NEC NVM-CA Series, Integration Manual, Page: 95 / 266

Share
Download
NEC NVM-CA Series Integration Manual Download Page 95

VDS

Issue  1-0

Integration Notes

 

X

91

VDS

Integrati on Notes

The VDS and the VDS Key Hybrid currently belong to the VDS phone system family.  However, 
the Integration With Datastar section of the NVM-2000 System Guide (P/N 17500INS05 or 
higher) refers to these phone systems as the Datastar PBX and the Datastar Hybrid.  The informa-
tion below applies to VDS phone systems.

Hardware and Software Requirements

Q

 VDS:
Software Version 12.10 (P/N 89092-12) or Version 10.3 (P/N 89091)
Version 9.0 (P/N 89090), 10.2 (P/N 89091), and 11.0 (P/N 89092) are not compatible.
Universal Trunk Card (P/N 89045A Series 5.0), an External Ring Generator, and a Talk Battery 
are required for OPX installation.
Station Card (P/N 89021C ) and DTS ASI (P/N 89749) or DTS Dual OPX/ASI (P/N 88750 
Series 2) are required for ASI installation.

Q

VDS Hybrid:
Software Version 1.3 (P/N 89340A) or Version 10.3 
Universal Trunk Card (P/N 89045A Series 5.0), an External Ring Generator, and a Talk Battery 
are required for OPX installation.
ASI installation is NOT COMPATIBLE WITH THIS SYSTEM.

Voice Mail Availability

This phone system is available on the NVM-2000CAwith software version 8.01 or higher.

Phone System Programming

Terminal Programming

E- Extension Setup

E2 - Circuit Type

Use this option to assign circuit type 51 to each VX port.

E5 - Hunt Type

Use this option to program each VX port with Hunt Type 06.

EA - Master Extension Number (for UCD Hunt Group)

Use this option to program each VS port with the Master Extension Number assigned in QP 
Programming below.

EK - Voice Mail (VX) Port

Enable this option for each VX port.

E9 - Direct Trunk Termination

Use this option to terminate the trunk to the VX Master Extension Number (see QP on the next 
page) for each trunk that the Voice Mail should answer.

EF - Assigned Night Answer

Use this option to terminate the trunk to the VX Master Extension Number (see QP on the next 
page) for each trunk that the Voice Mail should answer.  For this night application, make sure 
that the E9 entry for the trunk is 300.

Summary of Contents for NVM-CA Series











































































































































































































































































Reviews:

No comments