NEC MT-2550-24874C, Service Manual

Page: 96 / 214

2-54 Setup and Operation
6. Select IDE-CD-ROM (Atapi 1.2) / Dual-Channel PCI IDE Controller and click
Remove . Click Yes in the Remove Drivers window to confirm the driver
deletion.
7.
Click
Add
to add the new driver. The Install Driver window appears.
8.
Click
Have Disk
. The Install from Disk window appears. Change the path in the
text field to: C:\piix3ide .
9. Click OK . The Install from Disk window reappears displaying Intel PIIX PCI
Bus Master IDE Controller
.
10.
Click
OK
. The Windows NT Setup window appears. Click
New
if prompted that
the drivers already exist. Change the path in the text field to: C:\piix3ide .
11. Click Continue . The Systems Settings Change window appears.
12. Remove the CD and click Yes to restart the computer.
Matrox Mystique Video Drivers
Load the Matrox Mystique Video Drivers into a system with Windows NT

as follows.
1.
Insert the PowerMate Professional Series Driver CD into the CD-ROM reader.
2.
From the Windows NT desktop, click
Start
on the taskbar, point to the
Programs folder, and click Windows NT Explorer .
3. Select the CD-ROM drive and double click the following folders in succession:
Winnt
,
Video
,
Matrox
, and
NT4.0
.
4.
Double click
Setup
. The MGA PowerDesk and driver installation window
appears. Verify that the default selection is Install MGA PowerDesk and
drivers .
5. Click Install . The Installation Path window appears. Verify that the path
displayed is
C:\Program Files\MGA NT PowerDesk\
.
6.
Click
OK
. The Program Selection window appears.
7. Click OK . The MGA Setup Information window appears.
8. Click OK . The screen changes as the installation proceeds. Do not click the
mouse until the System Settings Change window appears.
9.
Click
Yes
when the Systems Settings Change window appears with the prompt
to restart the computer.
10. After the system restarts, configure and test the display settings. Click OK to exit
the Display Settings display.