2-44 Setup and Operation
Restoring the Files
Complete the restoration process as follows.
1.
In the “Restore the files from the CD” area of the screen, locate the two options:
Restore the files listed — this option lets you proceed with the restoration and
continue to the next step. Go to the next step to complete the restoration.
Cancel — click this option to cancel the restoration. This returns you to the
NEC System Restore menu.
2.
To proceed with the restoration, click “Restore the files listed.” When the
restoration is completed, a file restore message appears.
3.
Click
OK.
4.
If you replaced any Windows system files, exit Windows and restart the system.
Recovering the System
If the preinstalled software becomes unusable or you can’t reboot from the hard disk, you
can still restore the system to its original shipping configuration.
System Recovery erases and resets the hard disk completely before reinstalling the files.
CAUTION:
If you are doing a Full System
Recovery, ALL files on the hard drive will be
deleted and replaced by the factory installed files.
You will
•
lose data
•
need to reinstall any software you installed
yourself.
Full System Recovery should only be used if the
preinstalled software is unusable. If you are
unsure about using this procedure, call the
NECCSD Technical Support Center (TSC). TSC
representatives will help you determine if this is
your situation. See Chapter 4 for the technical
support telephone number.
The System Recovery requires booting from the CD Restore disc. Here is the procedure to
start the recovery process. Follow it carefully.
Summary of Contents for MT-2550-24874C
Page 13: ...xiv Contents ...