Technical Information 1-21
busy lamp that lights during read operations
CD tray that opens and closes when the open/close button is pressed
open/close button for opening or closing the CD tray when the power is on
emergency eject hole in the front panel for manually opening the CD tray if power
is lost. Insert a paper clip into the hole and press inward to open the tray.
Figure 1-4 CD-ROM Reader Controls and Indicators
To load a disc in the sixteen-speed CD-ROM reader, follow these steps.
1.
Press the open/close button. The CD tray opens.
2.
Put the CD, printed side up, into the tray.
3.
Press the open/close button. The tray closes.
4.
To remove the disc, press the open/close button. The tray opens, allowing
removal of the disc.
CD-ROM Reader Settings
The reader is set as the master device on the secondary IDE/PCI port (see Figure 1-5). For
details about CD-ROM jumper settings and connector descriptions, see Appendix D.
Summary of Contents for MT-2550-24874C
Page 13: ...xiv Contents ...