Setup and Operation 2-3
Monitor Connection
NOTE:
Use the documentation that comes with
the monitor along with the instructions in this
subsection to set up the monitor.
1.
Locate the monitor signal cable.
2.
Connect the monitor signal cable to the VGA connector on the rear of the system
unit. Secure the cable with the connector screws.
Figure 2-3 Monitor Signal Cable Connection
3.
Connect the monitor power cable to a properly grounded wall outlet.
Speaker and Microphone Connections
Connect the speakers and optional microphone to the system unit as follows:
1.
Locate the speaker with the control knobs. This is the right speaker (see
Figure 2-4).
Summary of Contents for MT-2550-24874C
Page 13: ...xiv Contents ...