Setup and Operation 2-5
Figure 2-6 Connecting the Two Speakers
4.
Attach the Y-cable as follows.
Insert the red connector into the red jack marked “RIGHT LINE IN” on the
back of the right speaker.
Insert the white connector into the white jack marked “LEFT LINE IN” on
the back of the right speaker.
Insert the other end of the cable into the Line Out jack on the rear of the
system unit (see Figure 2-7).
5.
Connect an optional microphone cable to the Microphone In connector on the
rear of the system unit (see Figure 2-7).
Summary of Contents for MT-2550-24874C
Page 13: ...xiv Contents ...