Setup and Operation 2-41
2.
Use the slide bar in the Display Area section of the screen to select the screen
resolution. The default value is 800 x 600 pixels.
3.
Select the number of colors you want to display from the Color Palette section of
the screen. The default is 256 colors.
Alternatively, click on List All Modes. You get a list of all the modes available for
the video board.
4.
Click the Apply button to test the new display settings.
If you are sure that the settings are correct, click OK.
CD RESTORE
Windows 95 systems ship with a CD Restore compact disc (CD) included. The CD Restore
files let you restore all the system software files to their original factory-installed state.
The following subsections contain information on these procedures:
selecting CD Restore options
restoring individual files
recovering the system.
Selecting CD Restore Options
The following guidelines should help you decide which CD Restore procedures you should
use.
Restore Individual Files
This option lets you select the files and directories you want restored from the CD Restore
compact disc. Use this option to:
restore only a few files
control which files and directories are restored to their factory state.
You can use this option for restoring AUTOEXEC, CONFIG, and INI files.
This procedure runs in Windows 95. You’ll need to boot the system from the hard disk,
enter Windows, and insert the CD into the CD-ROM reader.
System Recovery
Use this option as a last resort when the preinstalled software becomes unusable or you
can’t reboot from the hard disk. This option requires booting from the CD.
Summary of Contents for MT-2550-24874C
Page 13: ...xiv Contents ...
