Setup and Operation 2-49
Have ready an MS-DOS
bootable diskette containing a
config.sys
file and an
autoexec.bat
file.
Perform the steps in the “Preparation” section before upgrading to the Windows
95 operating system.
Install the NEC 16X CD-ROM drivers before installing the IDE, video, or audio
drivers.
Install the PIIX3 IDE Drivers before installing the video or audio drivers.
Guidelines for Windows NT Installations
Follow these guidelines when preparing the system and installing drivers:
Have a spare diskette ready.
Bear in mind that the system will not be able to play audio CDs or
CD-I formatted CDs after the PIIX3 drivers are installed.
Driver Installation For the Windows 95 Operating System
The following procedures describe how to load the drivers for the Windows
95 operating
system.
NOTE:
Perform the steps in the “Preparation”
section and install the PIIX3 IDE Drivers before
installing the video or audio drivers.
Preparation
Perform the following procedure before installing the Windows 95 operating system and
before installing the drivers.
1.
Insert an MS-DOS bootable diskette into drive A.
2.
Copy a
config.sys
and an
autoexec.bat
file from the system to the diskette.
3.
Add the following line to the
config.sys
file:
device=nec_ide.sys /D:MTMIDE01
4.
Add the following line to the
autoexec.bat
file:
MSCDEX.EXE /D:MTMIDE01 /M:10
5.
Insert the PowerMate Professional Series Driver CD into the CD-ROM reader.
Summary of Contents for MT-2550-24874C
Page 13: ...xiv Contents ...
