![background image](http://html.mh-extra.com/html/nec/mt-2550-24874c/mt-2550-24874c_service-manual_248534112.webp)
3-14 Option Installation
3.
Align the notched end of the SIMM with the socket end closest to the bottom of
the system.
4.
Insert the SIMM at an angle into the socket.
5.
Tilt the SIMM toward the locking tabs using equal pressure at the ends of the
SIMM until it locks into the socket.
Figure 3-9 Inserting the SIMM
6.
Replace any cables or boards that you may have removed during this procedure.
7.
Replace the system unit cover (see “Replacing the System Unit Cover”).
NOTE:
If you find a discrepancy in the amount
of memory displayed at the Power-On Self-Test
with the amount of memory that you installed,
check that you installed the SIMMs correctly.
Video Upgrade
Some PowerMate Professional Series models contain a Matrox Mystique video board as
standard equipment. The Matrox Mystique video board comes with 2 MB of video
memory. The video board supports an optional 2-MB video upgrade module for a total of
4 MB.
Install the upgrade module onto the video board as follows.
1.
Remove the system unit cover (see “Removing the System Unit Cover”).
Summary of Contents for MT-2550-24874C
Page 13: ...xiv Contents ...