Option Installation 3-13
SIMM Removal
If the SIMM configuration requires the removal of a SIMM, remove the SIMM as follows.
CAUTION:
Reduce static discharge by touching
the system's metal chassis.
1.
Remove the system unit cover.
2.
Locate the SIMMs sockets on the system board (see Figure 3-8).
3.
Press the metal clips at the outer edges of the socket away from the SIMM (see
Figure 3-8).
4.
Push the SIMM away from the locking tabs and remove it from the socket.
Figure 3-8 Removing a SIMM
SIMM Installation
1.
Remove the system unit cover (see “Removing the System Unit Cover”).
2.
Locate the correct SIMM sockets for the desired configuration (see Figure 3-4
and Table 3-1).
If you need to remove a currently installed SIMM, see “SIMM Removal.”
CAUTION:
Before you install a SIMM, reduce
static discharge by touching the system's metal
chassis.
Summary of Contents for MT-2550-24874C
Page 13: ...xiv Contents ...