Setup and Operation 2-43
The following sections explain how to use the Restore Individual Files screen. Complete all
sections to restore the files.
Selecting Files
Under “Select files to restore,” select the files as follows:
1.
From the left dialog box, highlight the directory that contains the files you want to
restore.
2.
From the right dialog box, highlight the files you want to use:
To restore all of the files listed, click “Select all of the above.” This highlights
and selects all the files listed.
To restore only some of the files listed, click the file you want and highlight it.
3.
Once the files are highlighted, select the appropriate button under the list. The
buttons include:
Add selected files to list — click this button to add the selected files to the list
of files to be restored.
Clear all selections — click this button to deselect the files listed.
4.
Repeat steps 1 through 3 to select files from other directories. Continue until all
the files you want restored are selected.
Checking Selected Files
To continue the restoration process, check the files to be restored as follows.
1.
Look at the list of files in the “Check list of files to be restored” area of the
screen.
2.
If you need to add any files to the list, go back to the preceding section and repeat
those steps.
3.
If you need to remove any files from the list, do so as follows.
To remove any selected files, highlight the filename and click “Delete item in
list.” This method lets you remove one item at a time.
To remove the entire list, click “Clear list.”
Once the list is set, continue to the next section.
Summary of Contents for MT-2550-24874C
Page 13: ...xiv Contents ...
