1
INSTALLATION STEPS
STEP 1:
Download the firmware .zip - file
associated with the CAU3I.
2
STEP 2:
Once the firmware is downloaded,
un-zip the file contents onto your desktop.
Make sure you see 1 folders:
“USB300 Firmware 2416”.
3
STEP 3:
Plug in your CAU3I to a power source using the packaged power supply. Connect the
CAU3I to your computer via USB 2.0 or 3.0 cable and allow your computer to detect the device.
Unplug any other external devices that are currently plugged into the same computer, aside
from the product you are updating.
STEP 4:
Open the
“USB300 Firmware
2416” folder and locate
the lower case “Mass_
Production_Loader”
file.
Right-click and
select “Run as
Administrator.”
Allow this program
to make changes to
your computer.
4
CAU3I Desktop External
Firmware Instructions
