NEC ITK-8LCX User Manual Download Page 87

Page: 87 / 132

Set Call Back

(1) The called party extension is busy or no answer.

(2) Press the

Camp

Camp-On

(

(3) Replace the handset.

Wait for Call Back.

When the Busy Terminal Becomes Idle

(1) The telephone, which set Call Back, is alerted by

a ringing.

When busy terminal becomes idle or the

telephone that did not answer initiates or answers

a call or accesses a feature and then becomes

idle, the telephone used to set Call Back is alerted

by ringing.

The Call Indicator Lamp flashes.

(2) Lift the handset.

The extension number that was busy/no answer

is automatically dialed.

Cancel Call Back

(1) When the telephone is set with the Call Back

feature, the Call Back feature key lamp lights red.

(2) Press

Camp-On

(

CAMP CANCEL displays on the telephone LCD.

The Camp-On (35) lamp goes off.

Timed Queuing (Outside Line Only)

When a user originates an outgoing trunk call and the

called party is busy or does not answer, the caller can

set the Timed Queuing. When this feature is set, the

trunk seizure is repeated and the number is dialed

again after a predetermined time interval.

(1) Press the

Speaker

key.

You receive a dial tone.

The Speaker key lamp lights red.

(2) Dial the

Outside Line access code

(3) Dial desired number.

You receive a busy tone or a ring no answer from

distant end.

(4) Press

Camp

Camp-On

(

(5) Leave the speaker on.

The desired number automatically redials.

(6) Start the conversation with the called party.

Make/Answer a Call with Call in Progress

This feature allows you to put to hold a call in progress

by pressing the Call Hold feature key. This line can then

be used for originating another call or answering

another incoming call. After finishing another call and

replacing the handset, the original held call rings back

This feature is only available for the telephone
that is set by system data setting at initial
installation.

This feature is only available for the telephone
that is set by system data setting at initial
installation. This feature cannot be canceled
using a softkey.

The feature key is set by system data setting at
initial installation.

For details, contact the system administrator.

A busy tone is sent to the calling party when
the call is made to the extension that is in
Timed Queue mode.

Summary of Contents for ITK-8LCX





































































































































Search results

Summary of Contents for ITK-8LCX

Reviews:

Related manuals for ITK-8LCX

Brands by name

Popular brands

NEC ITK-8LCX, User Manual

Search results

Summary of Contents for ITK-8LCX

Reviews:

Related manuals for ITK-8LCX

Brands by name

Popular brands