background image

 40 

1.

Making/Answering Calls with a 
Headset

By Using An Optional Headset, It Is Possible To 

Originate Or Respond To Calls. 
When Using A Headset, The On-hook/off-hook 

Operation Can Be Made Using Headset/handset 

Feature Key.

  

Make a Call Using a Headset

While placing the handset on the terminal, make a call 

using the headset.
(1) Press The 

Headset/handset 

Feature Key.

Headset/handset Feature Key Lamp Lights Red.
Line Key Lamp Lights Green.

(2) Dial A Desired Number.

(3) Start A Conversation After The Called Party 

Answers.

(4) Press The 

Headset/handset

 Feature Key Once 

Again, After Finishing A Call.

The Headset/Handset Feature Key lamp goes off.

The line key lamp light goes off.

Answer a Call Using a Headset

While placing the handset on the terminal, answer a call 

using the headset.
(1) While hearing a ringing tone, press the 

Headset/

Handset

 feature key.

Feature key lamp lights red.

(2) Start conversation with the calling party.

(3) Press the 

Headset/Handset 

feature key once 

again, after finishing a call.

The Headset/Handset feature key lamp goes off.

The line key lamp light goes off.

If the upload fails for reasons other than the 
ones listed above, “Download Failed!” or 
“Upload Failed!” displays.
Contact your system administrator.

The feature key is set with system data setting 
at initial installation.
For details, contact your system administrator.

During a call in progress using the handset, 
you can switch to the headset by pressing the 

Headset/Handset 

feature key.

It is possible to answer a call by pressing line 
key after pressing the

 Headset/Handset 

feature key. You can also answer a call by 
pressing the 

Answer

 key after pressing the 

Headset/Handset

 feature key.

For details, contact your system administrator.

Summary of Contents for ITK-8LCX





































































































































Reviews: