NEC IT3510, Operation Manual

Page: 359 / 466

NEC IT Series Issue 1
NEC IT3510/IT2510 Operations Manual 5 - 25
Ë
Manual Reception:
The NEC IT3510/IT2510 activates the telephone handset ringer upon an
incoming call. The user must pick up the handset, press <Start>, and
hang up the handset in order to receive a facsimile. This mode is mainly
used if the user location only has a single telephone line, and that line is
used for both voice calls and facsimile calls.
Refer to Section 2.10 Settings for Received Documents in Chapter 3
Registration and Setting Operations on page 3-27.
3.2 While Receiving a Document
Ë
The touch panel displays a receiving icon:
Ë
When reception is complete, a beep is heard.
Ë
Refer to Section 2.1 Confirming the Communications Status in Chapter 6
Advanced Sending and Receiving Operations on page 6-1.
3.3 When the Recording Paper Runs Out
Ë
The touch panel displays an alarm icon indicating the lack of paper. The
’no paper’ LED lamp lights on the appropriate paper cassette, as well.
Ë
When paper begins to run low, the ’no paper’ LED will begin flashing,
notifying the user to replace the recording paper.
Ë
The received document(s) is stored in memory. Once the paper supply
is replenished, any stored documents will automatically be printed.
No Paper Icon