NEC IT3510, Operation Manual

Page: 74 / 466

1 - 30 Getting Started
Issue 1 NEC IT Series
Transmitting Ledger sized Documents
Ë
When a Ledger (11" by 17") document is transmitted, it is automatically
reduced according to the paper sizes available in the receiving facsimile.
To send Ledger size pages in their original size, select Nonreduced
Transmission. For additional details, refer to 2.11 Sending Documents
without Reduction in Chapter 5 Basic Sending and Receiving Operations
on page 5-15
.
S
ECTION
6 Q
UITTING AN
O
PERATION
This section describes how to quit an operation in progress.
Press the <Stop> Key
Ë
Press the <Stop> key when setting functions or registering information.
When the machine is operating, the function that is currently being used
is displayed on the touch panel, so that key may be touched to stop that
particular function. If either <Stop> or [Cancel] is pressed once again
without selecting the function to be canceled, the operation returns to the
original status.
Original (sender’s) paper size Ledger (11"x17") Legal (8.5"x14")
Destination unit’s paper sizes
Ledger (11" by 17") Original size Original size
Legal Reduced to legal Original size
Letter Reduced to letter Reduced to letter
Figure 1-23 Pressing the Stop Key