NEC IT3510, Operation Manual

Page: 360 / 466

5 - 26 Basic Sending and Receiving Operations
Issue 1 NEC IT Series
Ë
If memory becomes full, no further document data can be stored.
3.4 Paper Sizes and Document Formats
Ë
The received document sizes can be:
Ledger (11" by 17")
Legal (8 1/2" by 14")
Letter (Portrait - 8 1/2" by 11")
Letter (Wide - 11" by 8 1/2")
Ë
If the recording paper installed is not the same size as that of the
receiving facsimile, the document is either printed on the next larger size
paper (if installed), or the facsimile is reduced to fit on the available
paper size.
For example, if a ledger-sized document is received and the IT3510/
IT2510 has only letter-sized paper installed, the document is reduced
and printed on the letter-sized paper. Refer to Section 2.10 Settings for
Received Documents in Chapter 3 Registration and Setting Operations
on page 3-27.
Ë
When letter-sized documents are received, the page is rotated by 90
o
and will be printed, even though the documents were inserted (at the
source-end) in a different direction than the print paper (Rotation Print).
Ë
A received document cannot be printed on paper inserted in the Manual
Bypass Tray.
3.5 When Receiving Long Documents
Ë
When a document is received that is longer than the normal paper sizes,
the document image is reduced as shown below. In this case, the
optimal reduction ratio is automatically selected to fit the image onto the
print paper.