NEC IT3510, Operation Manual

Page: 455 / 466

NEC IT Series Issue 1
NEC IT3510/IT2510 Operations Manual 8 - 31
The image
received at the
receiver is not
clear.
The document is not set
correctly. Set the document correctly.
The scanning area is dirty. Clean the scanning area.
The original document is too
light. Adjust the contrast that is
appropriate for the document.
There is a problem with the
telephone line connection, or
with the receiving facsimile. Make a copy with this unit. If
the copy is clear, try to resent
the document to the receiver.
A blank sheet
is printed at the
receiving
station. The document was placed face
down in the ADF. Place the document face up in
the ADF and resend.
Automatic
transmission is
impossible.
The number is wrong. Confirm the facsimile number.
The number is a voice number. Confirm the facsimile number.
There is a problem at the
receiving end (such as, paper
out, toner out, memory full,
power off, etc.). Contact the receiving end and
check for trouble.
TX Marker is
too light. The Marker is becoming dry. Replace the stamp.
Reception
Condition Cause Countermeasure
The received
image is not
clear.
Approved print paper is not
being used. Only use quality copy paper.
The paper is damp. Replace the paper supply.
Toner has run out. Replace the toner bottle.
There is a telephone line
problem, or with the sending
end. Make a copy on this unit. If
the copy is clear, contact the
sending side to check for
trouble.
Transmission (Continued)
Condition Cause Countermeasure