NEC IT3510, Operation Manual

Page: 135 / 466

NEC IT Series Issue 1
NEC IT3510/IT2510 Operations Manual 2 - 13
1.5 Paper Size Reset
The paper size selection is reset to the default setting by touching
<Panel Reset>. If the machine sits idle, the paper size selection will also be
reset after a period of time (set by the user). For more details, refer to Section
2.6 Power Saving Settings in Chapter 4 on page 4-30.
1.6 Selecting the Zoom Ratio for Copying
Before Starting Operations:
The zoom ratio can be selected by the following methods :
• Full-Size The document is copied in the same size
as the original, regardless of the copy
paper size.
• Auto-Size The optimal zoom ratio is automatically
selected in accordance with the size of the
original and the selected copy paper size.
• Fixed Zoom (Letter, Legal, etc.) Zoom ratio for copying regular-sized
documents onto regular-sized copy paper
have already been set in touch panel keys.
• Zoom Up/Zoom Down The desired zoom ratio can be set in
increments of 0.1%.
• Slightly Smaller Image The document can be copied at a slightly
smaller size than the original by simply
touching the [Minimal] key. This is useful
when copying documents with writing at
the very edge of the paper. The zoom ratio
can also be changed.
• Custom Zoom The desired zoom ratio can be set using
the 10-key Pad.
The NEC IT3510/IT2510 can reduce or
enlarge the size of copies. The zoom
ratio can be set automatically in
accordance with the original
document’s size and the sizes of copy
paper installed, or it can be set
manually.