NEC IT3510, Operation Manual

Page: 261 / 466

NEC IT Series Issue 1
NEC IT3510/IT2510 Operations Manual 3 - 67
2.19 Registering Program Keys
Program keys are special keys registered to carry out routine functions at the
touch of a single key. If the same action is performed frequently (such as
sending documents to multiple destinations at a specific time, or making a
2-sided transmission with a certain image quality, etc.), the program key may
be registered so that all the needed features occur at the touch of a key.
Details that can be Registered:
The following four types of programs can be registered, as well as destination
data.
Transmission Program:
Image Quality, Contrast, Reduction, Serial Broadcast
Transmission, Real-time Transmission, Priority Transmission,
Timer Transmission, TSI, Destination Insertion, Transmission
Report, Remote Copying, Password Transmission, 2-TO-1
Transmission, 2-Sided Transmission, and TX Marker stamping can
be registered in program keys.
Batch Program:
Documents being sent to a common destination are stored into
memory all during the day. At a programmed time, all the
documents are then transmitted to the desired destination.
Polling Reception Program:
The time to perform a polling reception can be registered.
4.
Enter the index key name, then
touch [Enter].
Refer to Section 1.5 Entering
Characters for Registration on
page 3-5.
5.
Touch [Enter] repeatedly until
the display returns to the
stand-by screen.
i
To register consecutively:
Repeat the procedure from step 3.
Registering Index Keys (Continued)