NEC IT3510, Operation Manual

Page: 428 / 466

8 - 4 Troubleshooting
Issue 1 NEC IT Series
Memory is full. Memory is full. Reserve for transmission after
memory becomes available.
Print out any documents waiting
to be printed. This will free up
memory space.
Original left on glass. A page remains on
the Book Scanner
glass. Remove the document from the
Book Scanner glass.
Matching paper size is
not available. Reselect
paper size. There is no
appropriate paper in
any cassette that
meets the document
size and scaling
factor specified. Select the paper.
Load the proper size print
paper.
Matching paper size is
not available. Please
set matching paper in
the first cassette. The appropriate
paper size in not
loaded. Set the proper size paper in the
first paper cassette.
Auto Size mode cannot
used with the selected
paper size. Please
select a zoom ratio. The scaling factor
calculated from the
selected paper size
and document size is
not within the proper
range. Set the proper scaling factor.
Select the paper.
Replenish paper. The paper in the
selected cassette. Load print paper.
Please remove paper
in the Bypass tray. Paper remains on the
Manual Bypass tray. Remove all paper remaining on
the Manual Bypass Tray.
This mode cannot be
selected with the
Interrupt mode. A function that does
not accept an
interruption is
selected. Reset the Interrupt mode or the
function currently selected.
This mode cannot be
selected. Paper
cassette has been
designated as "Not for
2-Sided Copies". A paper cassette with
paper that cannot be
printed on both sides
is selected for
2-Sided copying. Reselect the paper.
Cancel 2-Sided Copying.
Table 8-2 Alarm Messages (Continued)
Messages Causes Countermeasure