NEC IT3510, Operation Manual

Page: 335 / 466

NEC IT3510/IT2510 Operations Manual 5 - 1
Chapter 5
Basic Sending and
Receiving Operations
S
ECTION
1 G
ENERAL
I
NTRODUCTION
This chapter describes how to operate the unit as a facsimile. First, the basic
operation items are described, in order to get the user familiar with sending
facsimiles, the various dialing methods used to send facsimiles, as well as setting the
image quality and contrast.
In Chapter 6, more advanced operational features are covered. Items such as Serial
Broadcasting, 2-Sided Transmissions, Relay Transmission, Timer Transmission, and
2-TO-1 Transmission are among the advanced features described.
S
ECTION
2 B
ASIC
S
ENDING
O
PERATIONS
This section describes the basic operations needed to send and receive a facsimile
document.
2.1 Quick Memory Transmission
When the NEC IT3510/IT2510 scans the first page of a document, it
immediately begins dialing the destination number. The IT3500 continues to
scan the remaining pages, while it sends whatever has been stored in
memory. Many other facsimile machines do not begin sending until all the
document pages have been scanned and stored.
Before Starting Operations:
Ë
Telephone line type:
The telephone line type setting may need to be adjusted. Refer to
Section 2.6 Setting the Line Type in Chapter 3 Registration and Setting
Operations on page 3-19.
Ë
Using the Auto-mode Screen:
Transmission is possible using this screen just by entering a number
with four digits or more (three digits for the IT2510), or a number starting
with ’0’ (facsimile numbers). Refer to Section 3.3 Stand-by Screen
(Initial Screen) in Chapter 1 Getting Started on page 1-14.