NEC IT3510, Operation Manual

Page: 151 / 466

NEC IT Series Issue 1
NEC IT3510/IT2510 Operations Manual 2 - 29
Points to Note When Stapling
It is recommended to sort up to the following number of sets of copies,
otherwise the copies may become unsorted or fall from the Finisher bin slots.
Refer to Table 2-4 Stapled Number of Pages Per Copied Set.
2.3 Hole Punching
The printed copies can be 3-hole punched for convenience and filing.
Before Starting Operations:
The optional Multi-staple Finisher or Mail-bin Finisher is required to use this function.
The hole punching position can be changed in accordance with the original document
and the direction of the copy paper.
Do not use this function with thick paper or OHP sheets. (Mail-bin Finisher)
Do not use this function with OHP sheets. (Multi-staple Finisher)
Table 2-4 Stapled Number of Pages Per Copied Set
When
Single-staple
Finisher is
Installed
When
Multi-staple
Finisher is
Installed
When Mail-bin
Finisher is Installed
# Sheets to
be Stapled
Number of Sets Accumulated
2 100 sets 100 sets 200 sets
3 to 5 80 sets 80 sets 150 sets
6 to 10 60 sets 60 sets 100 sets
11 to 20 40 sets 40 sets 50 sets
21 to 30 33 sets 40 sets 33 sets
31 to 40 — 40 sets 25 sets
41 to 50 — 40 sets 20 sets
Hole Punching
1.
Place the document in the unit.
For more information, refer to
Section 5 Handling Documents in
Chapter 1 on page 1-25.