NEC IT3510, Operation Manual

Page: 16 / 466

10 Regulatory and Safety Information
Issue 1 NEC IT Series
Care must be taken not to catch your fingers
or clothes when closing the cover.
Some surfaces are sharp or pointed, which may
result in injury to person or clothing.
Lift the product in the positions indicated
when transporting the product.
Lifting the product using any other area may
result in injury to person or product damage.
Before moving the product, first disconnect
the power cord and telephone/facsimile line
connection.
Failure to do so may damage the power cord
and line cable.
Do not place the power cord near a heater.
This may cause the power cord to melt, thus
exposing internal wiring that can cause fire or an
electric shock.
Do not touch the inside of the side cover or
the copper terminals located at the lower part
of the imaging unit.
Doing so may result in product failure due to
static discharge.
For product and property safety reasons,
disconnect the power cord from the wall
outlet when this product is not to be used for
prolonged periods.
Doing so will avoid the possibility of fire or
product failure.
Cautions