NEC Express5800 320La, User Manual

Page: 51 / 206

Setting Up the System 2-11
Mounting the Server Unit in the Rack Cabinet
Use the following procedure to mount the server unit into the rack cabinet.
! WARNING
Anchor the Rack Cabinet. The rack cabinet must be
anchored to an unmovable support or a front stabilizer to
prevent it from falling over when one or more units are
extended in front of it on slide assemblies. The anchors must
be able to withstand a force of up to 113 kg (250 lbs.). You
must also consider the weight of any other device installed in
the rack.
Avoid Injury. It is required that at least two people are
present when lifting and assembling the rack-mount server
unit into a rack cabinet.
Do not attempt to lift or move the server unit by its front
faceplate or the latches on its power supplies.
1. Use a mechanical assist unit or someone to assist you to carefully lift the
server unit onto the two rail assemblies and slide it toward the rear of the
rack cabinet. See Figure 2-7.
Figure 2-7 Mounting the Server Unit
2. Secure the front bezel to the rack cabinet's front vertical mounting rails using
the eight screws and plastic washers provided.