CRU Replacement and Server Upgrades 4-59
Installing and Removing
Optional 5.25-Inch Tape Drives
The optional 5.25-inch tape drives can only be mounted in a tower-based system
that has the
Internal Device Bay Expansion Kit
and a SCSI controller (PCI
adapter board) installed. For information on how to mount the expansion kit, see
subsection
Installing the Internal Device Bay Expansion Kit
and for information
on how to install a SCSI controller PCI adapter board see subsection
Installing
PCI Adapter Boards
in this chapter.
N
otes:
Set the SCSI terminator (if present) of the 5.25-
inch tape drive to
OFF
. Set the SCSI ID to a unique value
that will not overlap the IDs of other devices. For setup
operation, refer to the tape drive manual for setup
information.
The SCSI cable connector is equipped with a 50-pin
converter. Remove this converter and save it for future use.
When connecting the cable, be very careful that the device
does not pinch the cable.
Two tape drives can be connected to one group depending
on the connection method. However, to utilize the fault-
tolerant feature, we recommend that two identical tape
drives be connected to both groups to periodically back up
the data between the groups.
Summary of Contents for Express5800 320La
